ADL module main features:
mark.gif (41 bytes)
- Selectable sensitivity to 1V or 0,775V,
Constant 20X or 40X gain operation option.
- Operates in stereo, parallel or bridge mode.
- Variable low-frequency (high-pass) filter
with 18 dB per octave. Provides a perfect adaptation for the subbass path.
- Variable high-frequency (low-pass) filter,
with 18 dB per octave. Feeds your drivers perfectly.
- Bass equalizer filter with Q=2,
for equalization of bass reflecting speakers (Vented box or Band pass).
- Adjustable limiter independent for each channel.
Crest Factor limiter
The only system to accurately set the amplifier power for each type of speaker.
- Balanced input with XLR connector.


Technical Specifications:

.ADL Module.

-Signal/noise ratio

*Better than 105 dBA

-Inter-channel separation

*Better than 60dB

-Harmonic distortion

*Lower than 0.01% uncompressed
*Lower than 0.5% with a 6dB compression

-Input impedance

*20kohm balanced
*10kohm unbalanced

-Maximum input level


-Maximum gain



*Standard 16 pins, Plug&Play Studio R

-Panel connectors

*Balanced input: 3-Pin XLR connector, female

-Maximum output signal

*+9dB with limiter
*+18dB without limiter


*125mm X 74mm X 145mm



-Reference for specifications

*1V RMS of input